CSSN 900 Specifications download pdf (Page 65)

Smart Machine Smart Decision

SIM900_AT Commands Manual_V1.07 65 2012.12.10

+CLIR: <n>,<m>

If error is related to ME functionality:

+CME ERROR: <err>

AT+CLIR?

Parameters

See Write Command

Response

TA restricts or enables the presentation of the CLI to the called party when

originating a call.

The Command overrides the CLIR subscription (default is restricted or

allowed) when temporary mode is provisioned as a default adjustment for

all following outgoing calls. This adjustment can be revoked by using the

opposite Command.

If error is related to ME functionality:

+CME ERROR: <err>

Write Command

AT+CLIR=<n>

Parameters

<n> (parameter sets the adjustment for outgoing calls):

0 Presentation indicator is used according to the subscription of

the CLIR service.

1 CLIR invocation

2 CLIR suppression

<m> (parameter shows the subscriber CLIR service status in the

network):

0 CLIR not provisioned

1 CLIR provisioned in permanent mode

2 Unknown (e.g. no network, etc.)

3 CLIR temporary mode presentation restricted

4 CLIR temporary mode presentation allowed

Reference Note

3.2.20 AT+CMEE Report Mobile Equipment Error

AT+CMEE Report Mobile Equipment Error

Response

+CMEE: (list of supported <n>s)

Test Command

AT+CMEE=?

Parameter

See Write Command

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 256 257

No comments

CSSN 900 Specifications Page 65